Prepare for Installation

Network and Switch Requirements

  • TCP/IP Switches
  • Power over Ethernet (PoE/PoE+) Switch Ports
  • DHCP Server
  • Multi-cast enabled
  • Minimum CAT5 cable with maximum of 300 feet from the device to switch

Helpful Installation Documents

IP Device Quick Start Guide

IP Device Full Installation and Setup Guide

LLDP-MED Capability

IP Speaker with Display Mounting Template (IPSWD and IPSWD-RWB)

Small IP Display Mounting Template (IPCSS-RWB)

Double-Sided IP Display Mounting Template (IPCDS-RWB)

Equipment Compatibility

Below are some examples of brands that have successfully worked with AND products. We cannot endorse or guarantee any specific model, but several have proven reliable.

Switches / Midspan / Repeaters

PoE ports must carry 15.4 W (IEEE 802.3af). Lower port numbers generally work better in some brands, especially if higher port numbers lose some power when lower ports power other PoE devices. Choose a reputable switch and understand its power delivery capabilities. Brands that have worked fairly consistently include:

  • D-Link
  • Adtran Netvanta
  • Cisco
  • HP
  • Juniper
  • PowerDsine
  • Dell

PoE+ (IEEE 802.3at) Power Injectors

  • Phihong

PoE (IEEE 802.3af) Power Injectors

  • Phihong
  • ZyXEL POE12
  • MiLAN MIL-L100i

Wireless Buttons (from Illumra)

  • Illumra Wireless Handheld Switch E3T-S2Hxx
  • Illumra Wireless Wall Switch E3T-S1Axx
  • Illumra Low Voltage Relay Receiver E3R-R04FP-4

Protective Cages (from Wireguards)

  • For IPCSS-RWB, use G2056
  • For IPSWD or IPSWD-RWB, use G2017 (turned 90°)
  • For IPSIGNL-RWB, use G2081
  • For IPSTROBE, use G2085

Colored Lenses for Wall Mounted IPSTROBE or AND-STROBE-KIT-1 (from SystemSensor)

External Microphones

  • Shure 522